Bulletin, 5. ciltAmerican Society for Testing and Materials., 1905 Vols. 1-61 include reports of the 1st-64th annual meetings, committee reports and technical papers; v.16-38 include also "New and revised tentative standards [and] tentative revisions of standards" (varies slightly) |
Kitabın içinden
77 sonuçtan 1-5 arası sonuçlar
Sayfa 18
... taken in hand . Indeed at the present time , the one who controls the machinery of a ship , as well as the one who handles the throttle of a locomotive , is called an " engineer . " And , finally , it is apparently no abuse of words to ...
... taken in hand . Indeed at the present time , the one who controls the machinery of a ship , as well as the one who handles the throttle of a locomotive , is called an " engineer . " And , finally , it is apparently no abuse of words to ...
Sayfa 26
... taken from too high up in the ingot , but it left unsettled the cause of the seam . Perhaps , how- ever , a few words farther on certain well - known phenomena in steel metallurgy will help us in clearing up the point . It is obvious ...
... taken from too high up in the ingot , but it left unsettled the cause of the seam . Perhaps , how- ever , a few words farther on certain well - known phenomena in steel metallurgy will help us in clearing up the point . It is obvious ...
Sayfa 30
... taken : I. Standard Specifications for Structural Steel for Bridges and Ships . It was decided ( 1 ) to strike out the words " Bridges and " from the title of these specifications with a view of making them applica- ble hereafter to ...
... taken : I. Standard Specifications for Structural Steel for Bridges and Ships . It was decided ( 1 ) to strike out the words " Bridges and " from the title of these specifications with a view of making them applica- ble hereafter to ...
Sayfa 32
... taken from the top of the ingot , " the num- ber of tests should not be increased nor the heights of drop . At the recent meeting of the American Railway Engineering and Maintenance of Way Association it was decided to strike out the ...
... taken from the top of the ingot , " the num- ber of tests should not be increased nor the heights of drop . At the recent meeting of the American Railway Engineering and Maintenance of Way Association it was decided to strike out the ...
Sayfa 35
... taken as " that point at which the elonga- tion in 8 inches per 1,000 pounds of added stress per square inch first exceeds four ten - thousandths of an inch . " This suggestion was not accepted because it was considered commercially ...
... taken as " that point at which the elonga- tion in 8 inches per 1,000 pounds of added stress per square inch first exceeds four ten - thousandths of an inch . " This suggestion was not accepted because it was considered commercially ...
İçindekiler
7 | |
17 | |
30 | |
46 | |
63 | |
75 | |
101 | |
130 | |
308 | |
316 | |
319 | |
331 | |
335 | |
363 | |
381 | |
388 | |
165 | |
171 | |
179 | |
191 | |
198 | |
213 | |
221 | |
234 | |
254 | |
257 | |
268 | |
275 | |
283 | |
294 | |
304 | |
417 | |
426 | |
436 | |
445 | |
453 | |
458 | |
470 | |
496 | |
512 | |
520 | |
540 | |
555 | |
556 | |
561 | |
Diğer baskılar - Tümünü görüntüle
Sık kullanılan terimler ve kelime öbekleri
28 days absorption American Society Annual Meeting Asphalt Association for Testing average Bauzeitung beam bricks briquettes Building carbon Carnegie Steel Company cars Cast Iron cent Chairman chemical Chemist Chicago Civil Engineer coat compression Congress Consulting Engineer cracks cubes deflection elastic limit ELECTED elongation Executive Committee extensometer Foundry grades Gray Iron heat inch increase inspection Inspector International Association investigation Iron and Steel laboratory Lesley linseed oil load manufacturer Mass membership metal mixture modulus of elasticity mortar natural cement neat obtained paint Pennsylvania Railroad Philadelphia pig iron pigment Pittsburg Portland cement pounds President Professor Proposed Standard Specifications Railroad rails Railway reinforced concrete samples sand Schweiz Secretary Society for Testing Specifications for Steel specimen staybolt Steel Company Street stresses structural sulphur Superintendent surface temperature tensile strength tension test piece testing machine Testing Materials Thermit tion torsion wheel York Zürich
Popüler pasajlar
Sayfa 450 - AMERICAN SOCIETY FOR TESTING MATERIALS EXTRACT FROM CHARTER 1. The name of the proposed corporation is the "American Society for Testing Materials." 2. The corporation is formed for the promotion of knowledge of the materials of engineering, and the standardization of specifications and the methods of testing.
Sayfa 110 - Engineers, the American Society of Civil Engineers and the American Society for Testing Materials.
Sayfa 45 - The inspector representing the purchaser shall have all reasonable facilities afforded to him by the manufacturer to satisfy him that the finished material is furnished in accordance with these specifications.
Sayfa 213 - Ibs. 7 days (1 day in moist air, 6 days in water) 500 Ibs. 28 days (1 day in moist air, 27 days in water) 600 Ibs. One Part Cement, Three Parts Standard Ottawa Sand.
Sayfa 365 - The test piece shall be adjusted, so that the center of its upper surface is tangent to the spherical end of the plunger.
Sayfa 62 - No. 8 sieve, with a mixture of one to twelve bituminous facing. The mold shall be rammed evenly and fairly hard, thoroughly dried and not cast until it is cold. The test bar shall not be removed from the mold until cold enough to be handled.
Sayfa 355 - Conference was established by the Institution of Civil Engineers, the Institution of Mechanical Engineers, the Institution of Electrical Engineers, the Institute of...
Sayfa 62 - Л inch smaller in diameter than the top, to allow for draft and for the strain of pouring. The pattern shall not be rapped before withdrawing. The flask is to be rammed up with green molding sand, a little damper than usual, well mixed and put through a No.
Sayfa 38 - Chemical determinations of the percentages of carbon, phosphorus, sulphur and manganese shall be made by the manufacturer from a test ingot taken at the time of the pouring of each melt of steel, and a correct copy of such analysis shall be furnished to the engineer or his inspector.
Sayfa 42 - ... is manufactured. He shall furnish a suitable testing machine for testing the specimens, as well as prepare the pieces for the machine, free of cost.