 Chemical determinations of the percentages of carbon, phosphorus, sulphur and manganese shall be made by the manufacturer from a test ingot taken at the time of the pouring of each melt of steel, and a correct copy of such analysis shall be furnished...  Bulletin - Sayfa 38American Society for Testing Materials tarafından - 1905Tam görünüm - Bu kitap hakkında
 | American Society of Civil Engineers - 1904 - 780 sayfa
...satisfactory. fj.- — Chemical Analyses. — Chemical determinations of the percentages of carbon, phosphorus, sulphur and manganese shall be made by...shall be furnished to the engineer or his inspector. 7. — Form of Specimens for Plates, Shapes and Bars.— Specimens for tensile and bending tests, for... | |
 | Gaetano Lanza - 1905 - 974 sayfa
...manganese shall be made by the Chemiia| De. íurer from a test ingot taken at the time of the terminations, of each melt of steel and a correct copy of such analysis shall shed to the engineer or his inspector. Check analyses shall be am finished material, if called for... | |
 | American Society of Civil Engineers - 1907 - 1014 sayfa
...come within 4 000 Ib. of that desired. 5. — Chemical determinations of the percentage of carbon, phosphorus, sulphur and manganese shall be made by...shall be furnished to the engineer or his inspector. A check analysis shall be made from the finished material, if called for by the purchaser, in which... | |
 | Milo Smith Ketchum - 1907 - 430 sayfa
...the desired ultimate. 4. Chemical Analyses. — Chemical determinations of the percentages of carbon, phosphorus, sulphur and manganese shall be made by...of steel and a correct copy of such analysis shall he furnished to the engineer or his inspector. Check analyses shall be made from finished material,... | |
 | 1904 - 362 sayfa
...considered satisfactory. 6. — Chemical Analyses. — Chemical determinations of the percentages of carbon, phosphorus, sulphur and manganese shall be made by...shall be furnished to the engineer or his inspector. 7. — Form of Specimens for Plates, Shapes and Bars. — Specimens for tensile and bending tests,... | |
 | Charles Evan Fowler - 1909 - 180 sayfa
...phosphorus, sulphur, and manganese shall be made by the manufacturer from a test ingot taken at the time of pouring of each melt of steel, and a correct copy of such analysis in triplicate shall be furnished the inspecting engineer. The manufacturer shall also make at least... | |
 | Charles Conrad Schneider - 1910 - 76 sayfa
...desired will be considered satisfactory. 110. Chemical determinations of the percentages of carbon, phosphorus, sulphur and manganese shall be made by...shall be furnished to the engineer or his inspector. 111. Specimens for tensile and bending tests for plates, shapes and bars shall be made by cutting coupons... | |
 | American Society for Testing Materials - 1910 - 326 sayfa
...determine if the material conforms to the chemical limitations prescribed in Paragraph 2 herein, analysis shall be made by the manufacturer from a test ingot...shall be furnished to the engineer or his inspector. A check analysis may be made by the purchaser or his representative, from a broken tensile test specimen... | |
 | John Christian Ostrup - 1910 - 120 sayfa
...be made by the manufacturer from a test ingot taken at the time of the pouring of each melt or blow of steel, and a correct copy of such analysis shall be furnished to the engineer or his inspector. 195. Yield Point. For the purpose of these specifications, the yield point shall be determined by careful... | |
 | New York (State). Public Service Commission. First District - 1910 - 302 sayfa
...ingot, so taken, during the casting of each melt of steel, as to fairly represent the melt. Two copies of such analysis shall be furnished to the Engineer or his Inspector. SECTION No. 250. Check analyses shall be made, at the discretion of the Engineer, of the finished material,... | |
| |
