The test piece shall be adjusted, so that the center of its upper surface is tangent to the spherical end of the plunger. Bulletin - Sayfa 365American Society for Testing Materials tarafından - 1905Tam görünüm - Bu kitap hakkında
| Massachusetts. Highway Commission - 1900 - 218 sayfa
...shape, having a radius of 1 cm. (.4 inch), is substituted. The test cube is adjusted so that the centre of its upper surface is tangent to the spherical end...plunger, and the plunger is pressed firmly upon the cube by two stout spiral springs which surround the guide rod (F). The test cube is held at the bottom... | |
| Massachusetts. Highway Commission - 1900 - 214 sayfa
...shape, having a radius of 1 cm. (.4 inch), is substituted. The test cube is adjusted so that the centre of its upper surface is tangent to the spherical end...plunger, and the plunger is pressed firmly upon the cube by two stout spiral springe which surround the guide rod (F). The test cube is held at the bottom... | |
| Massachusetts. Highway Commission - 1900 - 214 sayfa
...shape, having a radius of 1 cm. (.4 inch), is substituted. The test cube is adjusted so that the centre of its upper surface is tangent to the spherical end...plunger, and the plunger is pressed firmly upon the cube by two stout spiral springs which surround the guide rod (F). The test cube is held at the bottom... | |
| Indiana. Department of Geology and Natural Resources - 1905 - 1534 sayfa
...radius of 1 cm. (0.4 inch) is used. It can be seen that the blow as delivered through a spherical end plunger approximates as nearly as practicable the...the plunger, and the plunger is pressed firmly upon tlu> test piece by two spiral springs which surround the plunger guide rods. The test piece is held... | |
| 1905 - 474 sayfa
...delivered through a spherical-end plunger approximates as nearly as practicable the blows of traffic, and it has the further advantage of not requiring great...surface is tangent to the spherical end of the plunger, which is pressed firmly upon the piece by two spiral springs surrounding the plunger guide rods. The... | |
| Clifford Richardson - 1905 - 616 sayfa
...test-piece parallel, as the entire load is applied at one point on the upper surface. The test-piece is adjusted so that the center of its upper surface...plunger, and the plunger is pressed firmly upon the test-piece by two spiral springs which surround the plunger guide-rods. The test-piece is held to the... | |
| Clifford Richardson - 1905 - 620 sayfa
...test-piece parallel, as the entire load is applied at one point on the upper surface. The test-piece is adjusted so that the center of its upper surface...plunger, and the plunger is pressed firmly upon the test-piece by two spiral springs which surround the plunger guide-rods. The test-piece is held to the... | |
| Austin Thomas Byrne - 1907 - 1114 sayfa
...machine shown in Fie. D. The specimens used are 25 mm. X25 mm. (0.98 inch) cylinders. The test-piece is adjusted so that the center of its upper surface...plunger, and the plunger is pressed firmly upon the test-piece by two spiral springs which surround the plunger guide-rods. The test-piece is held to the... | |
| Charles Edward Morrison - 1908 - 356 sayfa
...entire load is applied at one point on the upper surface. The test piece is adjusted so that the centre of its upper surface is tangent to the spherical end of the plunger, which is pressed firmly upon the piece by two spiral springs surrounding the plunger guide rods. The... | |
| University of Missouri. Engineering Experiment Station - 1910 - 858 sayfa
...delivered through a spherical end plunger approximates as nearly as practicable the blows of traffic. The test piece is adjusted so that the center of its...springs which surround the plunger guide rods. The hammer weighs 2 kg. and is raised by a small cable, and released by a trigger coming in contact with... | |
| |