| William Nicholson - 1800 - 644 sayfa
...to give it the form required by the wearer. For this purpofe, the workman turns up the edge or rim to the depth of about an inch and a half, and then...back again through the centre or axis of the cap, fo far as not to take out this fold, but to produce another inner fold of the fame depth. The point... | |
| Encyclopaedia Perthensis - 1807 - 794 sayfa
...I'-.ii, jWlhiatre acid andl water would not adhere to ing, but would roll off immediately the edge or rim to the depth of about an inch and a half, and then returns the point back apainj through the centre or axis of the cap, fo far a» not to take out this fold, but to produce... | |
| 1816 - 782 sayfa
...to give it the form required by the wearer. For this purpofe, the workman turns up the edge or rim to the depth of about an inch and a half, and then...returns the point back again through the centre or axie of the cap, fo far as not to take out this fold, but to produce another inner fold of the fame... | |
| 1818 - 578 sayfa
...next thing to be done is to give it the form required by the wearer. For this purpose, the work man turns up the edge or brim, to the depth of about an...axis of the cap, so far as not to take out this fold of the same depth. The point being returned back again in the same manner, produces a third fold, and... | |
| 1818 - 604 sayfa
...next thing to be done is to give it the form required by the wearer. For this purpose, the work man turns up the edge or brim, to the depth Of about an...axis of the cap, so far as not to take out this fold of the same depth. The point being returned back again in the same manner, produces a third fold, and... | |
| 1818 - 568 sayfa
...give it the form required by the wearer. For this purpose, the work man turns up the edge or brin, to the depth of about an inch and a half, and then...axis of the cap, so far as not to take out this fold of the same depth. The point being returned hack again in the same manner, produces a third fold, and... | |
| 1823 - 872 sayfa
...to give it the form required by the wearer. For this purpose, the workman turns up the edge or rim to the depth of about an inch and a half, and then returns the point back «gain through the centre or axis of the cap, so far as not to take out this fold, but to produce another... | |
| George Dodd - 1843 - 622 sayfa
...shape of a hat, before it finally leaves the ' kettle.' The workman first turns up the edge of the cap to the depth of about an inch and a half; and then draws the peak of the cap back through the centre or axis, so far as not to take out the first fold,... | |
| Robert Sears - 1844 - 514 sayfa
...shape of a hat, before it finally leaves the " kettle." The workman first turns up the edge of the cap to the depth of about an inch and a half; and then draws the peak of the cap back through the centre or axis so far as not to take out the first fold,... | |
| George Dodd - 1845 - 722 sayfa
...shape of a hat, before it finally leaves the ' kettle.' The workman first turns up the edge of the cap to the depth of about an inch and a half; and then draws the peak of the cap back through the centre or axis, so far as not to take out the first fold,... | |
| |