 | United States. Flight Standards Service - 1976 - 568 sayfa
...copper and chromium added. The principle alloy of this is 7075. Hardness Identification Where used, the temper designation follows the alloy designation and is separated from it by a dash: ie, 7075-T6, 2024-T4, etc. The temper designation consists of a letter indicating the basic temper... | |
 | Joseph R. Davis - 1993 - 802 sayfa
...on the sequences of mechanical or thermal treatments, or both, used to produce the various tempers. The temper designation follows the alloy designation and is separated from it by a hyphen. Basic temper designations consist of individual capital letters. Major subdivisions of basic... | |
 | M. M. Avedesian, Hugh Baker - 1999 - 336 sayfa
...temper of magnesium (and other) alloys. This consists of a letter plus one or more digits (see Table 8). The temper designation follows the alloy designation and is separated from it by a hyphen. For example, AZ91C-F indicates that the part (in this instance, a die casting) is made from... | |
 | Joseph R. Davis - 2001 - 658 sayfa
...temper of magnesium (and other) alloys. This consists of a letter plus one or more digits (see Table 2). The temper designation follows the alloy designation and is separated from it by a hyphen. For example, AZ91C-F indicates that the part (in this instance, a die casting) is made from... | |
| |
The temper designation follows the alloy designation and is separated from it by a hyphen. 